|
|
|
 Bottom line: if it confuses my mom, it is bad for FIRST. - Joe Johnson [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Bottom line: if it confuses my mom, it is bad for FIRST. - Joe Johnson [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
14-01-2004, 10:39
|
||||
|
||||
|
Re: IR recievers!?!?!
There is nothing to build for the IR receivers. They are a little black three pin component a little bigger than an LED. Pin 1 goes to a digital input, Pin 2 is ground and pin 3 goes to +5v. You could solder it to a PWM cable and plug it into a digital in. This is the easy part.
Writing your own code to use this signal is the tough part  |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode