|
I think that was the error I saw last night when I was using one of the other engineer's Windows XP laptop (I normally have used Win95.) When I downloaded a program which contained debug statements, and closed the debug window, I would get a basic run error on the robot. To recover from the error, I had to do one of the following:[list=1][*]Start up a new debug window.[*]Download a new program (and reset the robot controller)[*]Disconnect the programming cable between the robot and the laptop (and reset the robot controller -- I think.)[/list=1]
If that doesn't do it for you, the old standby reply is "Make sure the data requested in your initialization shiftout matches the variables read in the serin command."
Last edited by Greg Ross : 20-02-2002 at 01:49.
|