tank traction vs. speed

[DaBruteForceGuy]

which was more popular? (Or a combo like we did)

[kacz100]

Ours is well, different, very different not a combo or a 4X4

[DaBruteForceGuy]

ours is fairly unique as well but we have an all out combo

[kacz100]

I dont have pics but ours is a 2 wheel drive fast and a lowering 2 wheel drive slow or the simple format "a poor mans trany"

[Ian W.]

steve!! go and get off the computer now!! don't give away or "Special Secret". come on, i want to see the look on everyone's dace when we deploy the "Special Secret". although, i guess you weren't there when we pushed bob down the hallway, so you didn't see how amazing it is....

[Ragin_Kage]

We have our own machined wheels covered in tread...works pretty good too

[Ray2k4]

a 2 wheel direct drive is what we used with tires pretty much, it works great in most situations (i think all personally)

[GregT]

Originally posted by kacz100
I dont have pics but ours is a 2 wheel drive fast and a lowering 2 wheel drive slow or the simple format "a poor mans trany"

YAY! Poor mans? My team decided to use this transmission even though we had access to transmission engeneers! Simple on the fly shifting is great (not to mention what else you can do with lowering wheels).

Greg

[kacz100]

Well I considered this a poor man trany. Well did everyone hear about VanCor Transmission? If so we had the inventor come done to our shop and pitch it to put in our robot. One problem no reverse!!!!

[Solace]

Ours is a tread that has two moveable casters attached to the back end, which can lower to give us extra maneuverability.

[Kristophe85]

Originally posted by Ragin_Kage
We have our own machined wheels covered in tread...works pretty good too

You want awesome machined wheels?? Wait till you see the ones on our robot. Make sure to look for 151. Thanks to a few of the members on our team who stayed after school for weeks to work on these beauties. Made out of 6" stock aluminum, milled to a beautiful resinance. Awesome non-slipping tread, actually part of the wheel, and no carpet damage! These work wonderfully!

Estimated cost if we had them machined by someone else: $3500.

Estimated potential labor costs: $1000.

The look on all of your faces when you see our wheels: Priceless.

Thank you Tyler, Tim, Aaron, Chris, Chris, and anyone else i may have forgotten!

[DaBruteForceGuy]

Solace Ours is a tread that has two moveable casters attached to the back end, which can lower to give us extra maneuverability.

i don't understand, so the csters come out whenever you want to turn, or do you have them on a switch that you push when you want to get to a certain position in a hurry?