|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#17
|
||||||
|
||||||
|
Important - Oversize Teeth
Please look at this thread if you are designing your own gearbox for the drill motor:
http://www.chiefdelphi.com/forums/sh...ad.php?t=24181 The bottom line is that I have designed my gearbox with a 0.006" increase in the center distance due to the oversized pinion, but please read the thread for details. I am using a 56 tooth gear to mate with the 15 tooth gear. My standard center distance would be 24.85mm and I am using 25.00mm (0.015mm ~ 0.006"). Also, If you plan on using the gear from the drill motor then you need to get your mating gear at www.pic-design.com. Beware that these gears take at least 2 weeks for delivery. I ordered mine on 1/15 and still have not received them. I hope this helps. -Paul |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Portable cordless drill press | Gui Cavalcanti | Technical Discussion | 25 | 03-08-2003 22:21 |
| drill motor specs | Caitlyn691 | Motors | 34 | 17-01-2003 13:33 |
| Specs for drill motor gearbox? | archiver | 2000 | 4 | 23-06-2002 22:36 |
| Specs on Drill Motor Gear | JoeJ | Motors | 3 | 07-02-2002 12:51 |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 29-01-2002 12:32 |