How roboust is your teams robot going to be?

mtaman02 · #1 29-01-2004, 01:58

Today will mark the near ending of week #3

How Roboust do you think your robot will be?

Bharat Nain · #2 29-01-2004, 02:01

Team 25 = As usual a fireball

Solace · #3 29-01-2004, 02:13

every point of our robot that is susceptible to damage is built with numerous break-away joints. the joints will slip or stretch or whatever, but the mechanism itself will be unharmed.

mtaman02 · #4 29-01-2004, 02:21

neva mind i found the option for creatin a poll. i need to get used to vb3 really bad

sanddrag · #5 29-01-2004, 02:55

One word answer: very.

Ryan M. · #6 29-01-2004, 06:56

Despite the fact that many teams rejected (at least in the forums

) the idea of a hopper for catching the balls when they first fall, our team decided to give it a try. I don't know all the details (I'm a programmer not a hopper designer) but if we get hit while our hopper is out, it could snap. It would (supposedly) have to be a really hard collision, though.

Matt Attallah · #7 29-01-2004, 08:13

Hahahahahaha!!

After 1.5 years of my driving - altough i'm not going to drive this year - my engineers have always wanted a robust robot - but now it's required for my type of driving! hahahahaha!

Na, but ours will be very robust.

Tyler 783 · #8 29-01-2004, 08:43

Well our teams moto is build it 100 times as strong as it needs to be then drill holes in it because it's too heavy. Last year nothing that our team built broke. Except those stupid drill transmitions. If any of you saw our team in the pits I was probably in the back replacing a drill transmition. This year we are not using the supplied transmitions so nothing on our robot will break.

Case · #9 29-01-2004, 08:53

The chassis itself will never break. However we may have some problems with our other mechanisms, but its too early in the build to really determine.

Yeah, I hear that with drill motors, last year we had our robot on its back with about 15 people trying to make it work in time for our match.

Sachiel7 · #10 29-01-2004, 10:37

Ok, try this:
Think a tank with wheels. But a lightweight tank. That'll give you an idea of our bot.
We have about 75% of our drive done, and the chassis plus a few more drive components is just shy of 25 lbs. And it can take some major load.
Me (co-captain) and the captian both gave it our good old stress test, we sat on it, tried standing on it, gave it a few whacks, etc. Our weight combined is near 400 lbs. Our chassis didn't even flex.
I'm quite pleased with the way things are turning out with our drive/chassis this year. It actually looks like a slick bot. Well, slicker than anything we've done before.
Anyway, expect our bot to be taking major bashes without any effect this year. Oh, and we shouldn't get flipped like we did once last year (*see avatar).

George · #11 29-01-2004, 19:14

[

How Roboust do you think your robot will be?[/quote]

We're bring lawn chairs,
and glad to help anyone any time.

Geo.

Rickertsen2 · #12 29-01-2004, 19:19

Well at this point, out frame isn't too robust. It is 1" 8020, held toghther with those weird fasterners, whose name i don't remember. Anyway, i think we are going to double those up, gusset the hell out of everything and maybie add corner plates in places. If that still doean't work, then we break out the TIG welder.

DaveO'B365 · #13 29-01-2004, 19:37

As always, MOE i'm sure will be unbreakable(wink, wink, nudge, nudge)... they're deciding to give the pit crew a year off.

Alex Cormier · #14 29-01-2004, 20:49

Quote:

Originally Posted by Texan

Despite the fact that many teams rejected (at least in the forums

) the idea of a hopper for catching the balls when they first fall, our team decided to give it a try. I don't know all the details (I'm a programmer not a hopper designer) but if we get hit while our hopper is out, it could snap. It would (supposedly) have to be a really hard collision, though.

wouldn it also tip over with the weight of those balls going at it? that would be cool to watch...

mtaman02 · #15 30-01-2004, 02:22

well im not going to give away any magical secrets but the robot that i went to is building will be robust like every yr and im hoping they can make it their 4th. yr with no mechanical failures.

Hey 522 you know what time it is rite its nearing robo time!

I had to put that in they'll probably beat me up later today when they read the forums lol.

i'd post a teaser for your guys but your way too smart and i can't have the fun go away in a day or two.

View Poll Results: How robust do you think your robot will be
Not Robust Enough	6	7.79%
Too Robust	17	22.08%
Robust to the point where it will break and need parts replaced after a few matches	13	16.88%
Robust to the point where we'll be working on other teams robots cuz ours won't break	46	59.74%
Don't know what my team wants to build / You'll have to wait and see!	11	14.29%
Multiple Choice Poll. Voters: 77. You may not vote on this poll

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How much planning goes into your robot?	Jnadke	General Forum	41	29-01-2006 21:29
Hits, Misses, & Suggestions -- long message	archiver	2000	17	23-06-2002 23:36
WASH Palm scouting at the Championship	Mike Soukup	Scouting	2	19-04-2002 15:14
Index of team's post about their robot...	Ken Leung	Robot Showcase	1	20-03-2002 17:10
Which teams are you looking forward to their robot?	Ken Leung	General Forum	17	14-02-2002 19:59