|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#16
|
|||
|
|||
|
Re: Horribly behind??
Quote:
. Keep in mind that this year, a box on wheels and a basketball player aren't all that bad...I guess my point was that you might not be all that behind schedule just because you haven't built anything. |
|
#17
|
||||
|
||||
|
Re: Horribly behind??
We have a few students who go to UC Irvine that I may be able to hand off to you if you are badly in need of help.
Let me know. cdk@1stnetusa.com |
|
#18
|
|||||
|
|||||
|
Re: Horribly behind??
we are also behind, instead of focusing on one part of the robot we have done little bits of each. its harder to judge weather or not we will end up with a working robot. we only have 4 - 7 members stay after each day to work, and only 4 are compitent with tools. i do have to say you are not the furthest behind, a school in our area has not even recieved thier parts.
|
|
#19
|
|||
|
|||
|
Re: Horribly behind??
Quote:
We didn't really "turn down" anything. We just said that we were going to try and do it on our own this year. At that time we thought we had a machinist and an eningeer that were gonna help out, but both bailed on us. Also 294 is about an hour away, and it's difficult (if not impossible) to convey things over the phone or through email. Without being there in person it's pretty hard to get any real "mentoring" in a mechanical sense. We know the ropes now well enough to manage in terms of the paper work, emailing, getting spare parts, etc. It's just the design/fabrication that it'd be nice if someone was standing by to tell us how to do it. |
|
#20
|
|||||
|
|||||
|
Re: Horribly behind??
Quote:
![]() Syracuse is sittin' at close to 140 inches of snow thus far this winter....and it's only January ![]() |
|
#21
|
|||||
|
|||||
|
Re: Horribly behind??
Quote:
![]() |
|
#22
|
||||
|
||||
|
Re: Horribly behind??
The only area our team is very behind on is the coding. Our drvetrain is supposed to be ready for some testing tonight. (Well, it supposed to be. We'll see...
) The only coding we've done has been to setup portions of the code as a base for our autonomous functions. Of course, as I'm a programmer geek type, maybe I'm just not aware of other components statuses. ![]() |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|