Team 60 Teasers

[Dima]

Meh need to learn to use these forums, just lost everything i was typing

Originally Posted by Ken Leung

I cannot easily see the shaft coupler on the first picture, so I am not sure if it's on the table or not.

Ken if you look in the first picture you will see the coupler in the reflection on the atwood motor.


Ok now that we are through that, here comes the rest of it:

2 gearboxes per a robot! Because the sprokets on the gearbox are there to drive the other 2 (or maybe 4 or belts) wheels. Also the coupler is there to attach ether the FP or the Drills (i would use the FP's becuase then you can use the stronger drill for the arm, or maybe the vandoor like they did in the past so then the dills go in the gearbox).

Now here comes the stretch:

Remember that Kingman posted thier gears there was 8 of everything? well that would mean gearboxes right? Say what would you use 8 identical gearboxes for if you only have 2 per a robot? Maybe if you split those between 2 teams? 4 per team? Remember the Frames 254 posted? (Here) well 4 of those 2 per team. How about those plates?(Here) The hole patterns and the general shape looks very close to the gearboxes kingman posted.

Whatever here is my one post per year! Enjoy