techniques to fasten PVC Pipe to a metal rod?

[greencactus3]

Originally Posted by Adam Y.

That still is a tough one to figure out. There are quite a few differnt glues they cold use also you would have to add in that both materials are non porus.

yeah. don't use stick glue. i think it won't work.
it matters on the size of the rod, but if it's a big diameter, you might be able to use wire. maybe. its easy to suspend stuff in mid-air.. kinda.
well you said you were open to ANY ideas so...

[Al Skierkiewicz]

If you are simply slipping the PVC over the end of a rod...
Cut a slit in the PVC (down the length of the overlap with the rod.) , slide it over the end of the rod, secure with a hose clamp or two that sqeezes the PVC against the rod.

[roknjohn]

Drill a hole in a PVC end "CAP", and stick a bolt thru from the inside. Tighten a nut down on it from the other side (really good). Then, glue the cap on the pipe with PVC cement.

For shrimp baiting, we use 12 foot 1.5" pvc pipes to mark the underwater bait. One year we added a 15" threaded rod to the end to help plant in firm bottoms.

[Tytus Gerrish]

Hose clamp

strap it on and screw it down

[pryoplasm]

Originally Posted by Tytus Gerrish

Hose clamp

strap it on and screw it down

seconds the hose clamp. they work well, and arent heavy.