Top 10!

[Rich Wong]

Top 5 quotes from Saturday:

1. "I swear..... this time it will work!'

2. "oh oh... that's the FIRE alarm!"

3. "sorry about the smoke condition.... a little problem with the saw..hehe"

4. "THE MOTORS GO ON THE OTHER LEFT SIDE NOT THIS LEFT SIDE!"

5. " what do I do with all these extra parts?"

[Daniel Brim]

A quote that made me laugh: "All together, this robot will weigh 80-90 pounds." (Our base with sprockets and stuff is 30).

[Andy Baker]

"oh... I thought that 10 in-lbs was stronger than that... ooops!"

"hmmm... that drill motor mount is kinda wimpy."

Andy B.

[fire chaser 134]

"how's it hangin"

[Pat Roche]

"Hows it hangin?"

-Pat

[Mike M.]

"hey we got two extra days to drill holes"
my exact words when learing about the 2 extra days

[Pat Roche]

Pat--"How many times am I gonna hit my head on that stupid arm???"
Jake--"As many times as it takes."

[Joe J.]

It's not a hand mill it's a hand DRILL !

It isn't a good thing but if it works I won't complain.

Loki! What did the bad man do to you?

Who bent your bit.

It's not bent it's just at an angle.

They are either not long enough or they are too short.

I don't know why they haven't sent us our freaking wheels yet.

[Mike Heinowski]

Come on Joe, there were more then that.

[Rickertsen2]

Originally Posted by Andy Grady

2. "Why is it, everytime I drop a cap screw, it falls in THAT corner of the machine...can somone find me a magnet?"

-Andy Grady

Hmm i have heard that alot recently. We have a grinder that hates one of the other students. It has an insatiable(sp?) hunger for bits of keyway.


My favorite quote was posted somewhere around here and it wnet somehing liek this: "everyone knows the best way to lighten a robot is to turn is over, shake vigorously, and throw awa ywhatever falls out". Last year we had a nutdriver that someone clumsily dropped into an upright piece of our frame stuck in our robot the entire season until a few weeks ago when it was finally missed and so we got it out.

[Joe J.]

Originally Posted by Akuu

Come on Joe, there were more then that.

Ok there was more Mike here it is.

"Steve is this your music?" " Yes. Why?" "Because it sucks."

"Did I zap you, dude?" "Yes!" "I'm sorry dude. I thought I just crossed the leads."

Why is everything falling off?

"Whats the experation date on these?" "Who cares?"

You better close that door before you close the door.

"So Jagadics would kneel down and we would hear a wimper like someone ran over a small puppy. Then and only then would we realize that poor Joe sat on a steel shaving the wrong way." - Bob Millen

[TheShadow]

"let's test autonomous mode again"
"let's test autonomous mode again"
"let's test autonomous mode again"
"let's test autonomous mode again"
"let's test autonomous mode again"
"let's test autonomous mode again" x 500

"is autonomous mode working?" "I don't know let's test it" (goto top of post)

"It's Tom's Fault" or "Blame Tom"

[Devin L.]

-"thats not a mistake, thats product enchancement!"
-"how many times do i have to beat you before you will give up" (what i say when andy always loses to me when he feels like he can beat me in shooting ) just messin wit ya andy

[Mike M.]

Originally Posted by Devin L.

"how many times do i have to beat you before you will give up" (what i say when andy always loses to me when he feels like he can beat me in shooting ) just messin wit ya andy

this is so true andy keeps denying that devin has beaten him multiple times

[Todd Derbyshire]

(As robot is crashing to the ground) Just a bit Ti, Tiip, Tiiip, Tiiiipy