I/R trouble!!!

[team 1442]

Originally Posted by deltacoder1020

whew. calm down, take a deep breath. now, tell us what problems you're having. if I told you a program "wasn't working" and didn't say anything more, could you even begin to fix it? we need more information.

OK the problem that we been having is that we can't make the autonomus period for the robot, we put one of the programs we made on users routine fast but it doesn't work please if you could tell us were to put or what do we need to make it work because the program does not work please help.

[rwaliany]

Post your code changes please.

[Joe Ross]

Did you make a competition dongle so that you are able to put it in autonomous mode? http://www.innovationfirst.com/FIRST...nout_Guide.PDF

[deltacoder1020]

Originally Posted by team 1442

OK the problem that we been having is that we can't make the autonomus period for the robot, we put one of the programs we made on users routine fast but it doesn't work please if you could tell us were to put or what do we need to make it work because the program does not work please help.

have you tried adding a printf statement into the code to see if the program is even running? if you are putting the autonomous code into the User_Autonomous_Code() function (and you should be), it won't run unless you enabled autonomous mode on the competition port.

[team 1442]

Originally Posted by deltacoder1020

have you tried adding a printf statement into the code to see if the program is even running? if you are putting the autonomous code into the User_Autonomous_Code() function (and you should be), it won't run unless you enabled autonomous mode on the competition port.

we do have a printf and it does read but the program for the sensors does not work we are rookies and it is the first time we use C so not much expirience so please can you guide us trow step by step how to enter the code please.