|
Re: connecting pressure switch
Just hook the black (gnd) wire to one screw and the white (signal) wire to the other. You should crimp ring connectors on the end of the wires for a good connection. The red (+5v) wire is unused.
In the future you should post a Technical question like this in one of the Technical Disscusion forums (Electrical or pnuematics).
[EDIT] If you are using the default program you need to connect the 3 pin connector to digital in #18 on the Robot Controller [/EDIT]
__________________
Electrical & Programming Mentor ---Team #365 "The Miracle Workerz"
Programming Mentor ---Team #4342 "Demon Robotics"
Founding Mentor --- Team #1495 Avon Grove High School
2007 CMP Chairman's Award - Thanks to all MOE members (and others) past and present who made it a reality.
 Robot Inspector
"I don't think I'm ever more ''aware'' than I am right after I burn my thumb with a soldering iron"
Last edited by The Lucas : 19-02-2004 at 15:01.
|
Differentiating based on any superficial criteria (gender, race, or other demographic) only serves to reinforce the false idea that they matter. - JamesCH95 [more] 
19-02-2004, 14:56
Similar Threads
Threaded Mode