More Programming Blunders...

[KWalsh]

The Solenoid Valves are not programmed correctly, because the lights on the Spike Relays are red instead of green, can someone inform me on how to make our three solenoid valves to work by modifying the default program?

[deltacoder1020]

Originally Posted by KWalsh

The Solenoid Valves are not programmed correctly, because the lights on the Spike Relays are red instead of green, can someone inform me on how to make our three solenoid valves to work by modifying the default program?

the aliases for relayX_fwd and relayX_rev correspond correctly to the labels on the spikes, but not the lights - in fact, the labels were printed wrong, so IFI changed the aliases in the default code so that the labels would be correct. Thus, you will see red when M+ has power, and green when M- has power.

[Mark McLeod]

Originally Posted by KWalsh

The Solenoid Valves are not programmed correctly, because the lights on the Spike Relays are red instead of green, can someone inform me on how to make our three solenoid valves to work by modifying the default program?

The latest re-release of the default code from IFI corrects this problem. You just need to copy the latest ifi_aliases.h file into your project.
See http://www.innovationfirst.com/FIRST...umentation.htm