|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: pic: last minute weight loss
That is alot of holes. Is that lexan? how much weight did that take out?
We also were drilling holes last night, we drilled 22 holes in our 1/4 inch drive plate that took out a lb. Then we removed a window motor that lost about 2.7 lbs then we switched from solid casters to pnuematic casters, now we are 2.6 lbs under weight. Besideds we didn't really need that motor, just don't say anything to our driver. LOL Always, the kid in the red hat Team 836 |
|
#2
|
|||
|
|||
|
Re: pic: last minute weight loss
Those holes dont reduce weight there speed holes of course.
|
|
#3
|
||||
|
||||
|
Re: pic: last minute weight loss
Quote:
Not sure about the weight loss for that individual peice. But all the holes we drilled in lexan last night lost over 5 pounds |
|
#4
|
|||
|
|||
|
Re: pic: last minute weight loss
we lost a bit over 4 pounds yeterday, by just taking holes out. somehow making it into 129.6lbs.
since we didn't have time to take it apart and put it on a mill or even a drill press, we used hand drills with a half inch bit. i don't think ill see very many teams like us who used such small holes. well we learned that's what happens when you start building without even thinking about weight. next year, we'll lighten everything BEFORE we mount it. |
|
#5
|
|||||
|
|||||
|
Re: pic: last minute weight loss
Thank the Lord Almighty that we didn't have to take any holes out. I would rather have but we didn't.
|
|
#6
|
||||
|
||||
|
Re: pic: last minute weight loss
We were a pound and a half over. We drilled 6 1-inch holes through 3/8 inch aluminum, and it took off .5 pounds. We drilled 6 identical holes, and around 15 5/8 inch diameter holes through equal thickness aluminum, and SOMEHOW, those 21 holes took off only .4 pounds. Our bot defies the laws of physics.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: last minute weight loss | CD47-Bot | Robot Showcase | 6 | 26-02-2004 01:17 |
| pic: Team 1156 - Weight Measure | CD47-Bot | Robot Showcase | 5 | 25-02-2004 23:50 |
| Lots of Wheels and F = u x N | archiver | 2001 | 17 | 23-06-2002 23:37 |
| weight advice | SharkBite | Technical Discussion | 36 | 15-02-2002 07:30 |