pic: 571's new gearz loose weight

[Arefin Bari]

Originally Posted by OneAngryDaisy

the picture says 12 pounds. thats one heavy sucker, 24 combined

i dont blame them... our each transmission weights 15 pounds...

[RogerR]

Originally Posted by mechman108

i dont blame them... our each transmission weights 15 pounds...

hah! ours weigh almost double that!.....but then again, ours run the length of the bot...

http://www.chiefdelphi.com/forums/pictures.php?s=&action=single&picid=6516&direction =DESC&sort=date&perrow=4&trows=3&quiet=Verbose

I never really appreciated speed holes until after building that bot

[Jones571]

but that is 12 pounds for both of the trani'z not each

y do your trani'z run the length of your bot?

[RogerR]

Originally Posted by Jones571

y do your trani'z run the length of your bot?

we're using direct-drive (spur gears) instead of chain or pulleys to transfer power from the motors to the wheels of our bot

[Jones571]

y do that the weight must be a killer. It really eats up your weight limit quickly? im not seeing the benefit of that.

[RogerR]

Originally Posted by Jones571

y do that the weight must be a killer. It really eats up your weight limit quickly? im not seeing the benefit of that.

actually, in the begining, we weighed about 78 lbs, but after some lightening holes in the gears, turning down the hubs, and replacting many steel parts with aluminum, we dropped almost 15 pounds. we didn't want to deal with the loss of effciency and other problems that chain drives can have if they aren't designed properly. we actually modeled our drivetrain after team 25, so we aren't the only ones to do this.

[Jones571]

yea i can understand that 25 had an sweet drive train last year i cant watie to see what they did this year.