|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Creating no pressure with double solenoid?
Since it sounds like you are trying to not send pressure you could also use a three position valve that is "all ports open" in center position.
This means that it works just like the dual except if you don't send a signal to one of the solenoids then it will open up both cylinder ports to exhaust, therefore releasing all pressure in the cylinder and allowing it to freely move. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Double Solenoid Wiring | blindguyinanorg | Pneumatics | 7 | 09-10-2004 23:55 |
| Double Solenoid Wires | Lord Nerdlinger | Pneumatics | 4 | 17-02-2004 19:54 |
| using single solenoid like a double | SteveO | Programming | 14 | 02-02-2004 22:51 |
| Anyone willing to trade (something they need) for the SMC double solenoid? | Jeremy | Kit & Additional Hardware | 0 | 27-01-2004 20:14 |
| Will trade for double solenoid valve | archiver | 2001 | 2 | 24-06-2002 00:33 |