program light blinks red and green

[JBabbie]

I can upload my code just fine and everything works , but when the robot controller is turned off the program light of the robot controller blinks green and red and the robot will not work until I upload my code again... I thought it might have been a board problem , but my team has built 2 robots so we can practice prior to competition and I get the same problem and i have NO IDEA as to what could be causing the problem , could some one help me out please?

[Anthony Kesich]

hrmm, strange. I'm assuming you have already tried the forced reset from update number 7 and loding the default code to see if it does the same thing and have updated the firmware. If not, try them, they do wonders. If that doesn't work, I don't know what to say. Is there anything tricky you're doing with the code? Try e-mailing FIRST with your problem and a copy of the source code, they might be able to help you out a lot more than I can. Sorry.

-Kesich

[Astronouth7303]

Not to mention the new IFI_Loader. Both of us got the same problem. Mine was related to an infinate loop.

[Ryan M.]

Originally Posted by Astronouth7303

Not to mention the new IFI_Loader. Both of us got the same problem. Mine was related to an infinate loop.

Glad you solved your problem, Astronouth.

Try uploading the default code to see if it does the same thing. That will tell you if it is a problem with your code.