pic: Cyber Blue 234 Starting Position

[CD47-Bot]

loading photo ...

[Collin Fultz]

this isn't us hanging...obviously...this is us in the starting position.

[Tyler Olds]

Very cool guys, I always like to see what you are comming up with.

Now if I am right, it was the genious mind of Ryan D. that built the entire robot right (lol j/k, well maybe in 3ds max)?

I especially like the little cute bumber in front.

On a serious note: I like the tank drive powered by CIM motors and your 2x ball handeling looks sweet. Also the way your treds are positioned looks like they won't drive up on the small balls which is a big plus.

[Jay H 237]

That's one robot I'd like to see in action! I like the diamond plate in front. Is the lettering cut out of it with a blue background behind it or is it a decal? I can't really tell in the picture and the laptop I'm on now has a small screen.

[David Hoff]

Originally Posted by Jay H 237

That's one robot I'd like to see in action! I like the diamond plate in front. Is the lettering cut out of it with a blue background behind it or is it a decal? I can't really tell in the picture and the laptop I'm on now has a small screen.

To answer your question, there is a thin sheet of blue plastic behind the diamond plate.

Thanks for the compliments. Maybe we'll see you at Nats

[Jonathan M.]

I must say, it's very impresive. I'd really like to see this one in action.

[Ryan Dognaux]

Note that the picture of our robot hanging is in this thread - http://www.chiefdelphi.com/forums/sh...ad.php?t=26352

[Collin Fultz]

Originally Posted by Tyler Olds

On a serious note: I like the tank drive powered by CIM motors and your 2x ball handeling looks sweet. Also the way your treds are positioned looks like they won't drive up on the small balls which is a big plus.

actually it's the CIM coupled with the drills running each side. similar to our design last year...but not running through drill tranny