|
|
|
 Comments and Documentation: Use them! You would never believe how fast you will forget how something works, especially when things are flying at you so fast. Other/future programmers will understand what you did and why you did it. - BigJ [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||||
|
||||||
|
specs for the horizontal bar
Can anyone point me to the official specs for the horizontal bar attachment? Specifically, what do the fittings at each end look like where they attach to the vertical bars. Even a good close up picture of the joint at the Manchester kickoff field would help.
PLEASE don't post unless you know the real answer. I've already seen the drawings for the low-cost bar with pipe flanges - according to what you can make out in the rendering of the arena that isn't it. The drawings for the center structure, 1 and 2, only show the platform and the hole for the vertical bar. If we're going to be beat up about contact with that fitting I'd like to know what it looks like so I can design a retrofit. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2004 Motor specs - Part 1 | Paul Copioli | Motors | 12 | 28-01-2004 17:40 |
| Make the bar lower to get on? | tkwetzel | Rules/Strategy | 28 | 12-01-2004 05:57 |
| Team 68's REAL ROBOT!!! | Alexander McGee | Robot Showcase | 137 | 25-02-2003 09:42 |
| Grab bar on bottom of goals | archiver | 2001 | 0 | 24-06-2002 00:49 |
| dimensions of horizontal bar | archiver | 2001 | 7 | 23-06-2002 23:32 |
Linear Mode
