pic: Spacer....heh

CD47-Bot · #1 14-03-2004, 23:49

sanddrag · #2 14-03-2004, 23:50

How in the world could that have worked with the bent shaft. I hope you didn't run it like that. Spare Parts had tons of Van Doors and you can really swap those out fast.

Stephen Kowski · #3 15-03-2004, 00:04

wow....simply wow

-speechless

Madison · #4 15-03-2004, 00:14

Quote:

Originally Posted by sanddrag

How in the world could that have worked with the bent shaft. I hope you didn't run it like that. Spare Parts had tons of Van Doors and you can really swap those out fast.

You can't swap them out as quickly when the driving gear is tack welded to the motor output shaft

sanddrag · #5 15-03-2004, 01:00

Quote:

Originally Posted by M. Krass

You can't swap them out as quickly when the driving gear is tack welded to the motor output shaft

Sorry, missed that tack. Anyway, this was about the zip tie spacer. We've done that before (last year in testing). So many times it seems to be just the right width.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pic: Team PIC of 354 Westinghouse HS	CD47-Bot	Robot Showcase	4	29-02-2004 12:15
pic: Team 782 teaser pic	CD47-Bot	Extra Discussion	2	15-02-2004 23:53
TCP/IP on a PIC	Venkatesh	Electrical	1	18-11-2003 21:00
pic: heh heh heh	CD47-Bot	Extra Discussion	1	30-04-2003 12:02
pic: Another pic of Team 930	CD47-Bot	Robot Showcase	7	25-02-2003 21:07