|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: gyrochip
What sort of gyrochip?
|
|
#2
|
|||
|
|||
|
Re: gyrochip
It's a BEI Gyrochip.
It uses a vibrating quartz tuning fork sensing element. |
|
#3
|
||||
|
||||
|
Re: gyrochip
Quote:
Quote:
|
|
#4
|
|||
|
|||
|
Re: gyrochip
Quote:
|
|
#5
|
||||
|
||||
|
Re: gyrochip
Quote:
A better bet would be to check out the ADXRS150EB from Analog Devices - it's a better gyro to begin with, weighs less, and it meets the above requirements. |
|
#6
|
|||||
|
|||||
|
Re: gyrochip
At the AZ Regionals a coach of 980 told me they used gyros in their robot, and if you've seen that beauty in autonomous mode then I can see why you'd want some gyros of your own. Here's a Link to their sight. The contact info's at the bottom. Based on my experience with them, they'd be happy to tell you all about it.
|
|
#7
|
||||
|
||||
|
Re: gyrochip
search this forum for 'yaw rate' or 'gyro' and you will find many threads with excellent information on this subject
you can get them for as little as $50 |
|
#8
|
|||||
|
|||||
|
Re: gyrochip
When our auto didn't work in Canada, our head programmer used wheel encoders to move the robot out exactly 2.5ft and rotate left/right at precise 45 degree angles (gyro) while the Chicken Dance song was playing (thanks Mr. Breadner for honoring my request) and the entire drive team was doing the chicken dance.
So what if it wasn't useful. It was awesome ![]() |
|
#9
|
||||
|
||||
|
Re: gyrochip
There is a white paper that walks you through your question at [url=http://www.chiefdelphi.com/forums/showthread.php?threadid=26882]
The gyros are a very reliable device. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gyroship doubt | Daniel_H | Programming | 0 | 18-02-2003 13:37 |
| Gyrochip | Nick R. | Programming | 1 | 18-02-2003 13:01 |
| question about gyrochip | wes16zeus | Technical Discussion | 3 | 13-11-2001 16:24 |