Need way to fix power feed on OI

[Ryan M.]

Originally Posted by PhatMike

Eh .. 2mm is enough to solder on and slip some heatshrink over. It might be a better investment to see what IFI will charge you to fix it. If its out of your budget .. soldering or using the clips might be your only option.

If you attempt to solder it, your warranty is void.

[Mike Hendricks]

And the fact that the connector got ripped off, probally voided the warranty already.

[Marc P.]

From Innovation First's Site:

Innovation First warrants our products to be free from defects in manufacturing, materials and workmanship for a period of four (4) months from the date of purchase. This warranty covers normal use within the limits specified as stated in the applicable data sheets. This warranty does not cover abuse, misuse, incorrect wiring, alterations, connector damaged, or robot competition damage.

I take it that means it's out of warranty. For most electronic devices, physical damage isn't covered. However, Innovation First can be surprisingly accomodating, especially when it comes to FIRST equipment. I would check with them before doing anything. If they can't authorize a replacement or repair, they should be able to suggest the best course of action to get you back up and running.

[team222badbrad]

If you cant get it fixed before coming to PARC there is no need to worry!!!

We will be using the Innovation First controls. All IO power will come through the Competition port.
As for power up the robot you will have to use the tether....