[OCCRA]: hose clamps on drill transmissions' gear selector?

...remember RAID 0 is a trap. - Sperkowsky [more]

		Chief Delphi > Competition > OCCRA > OCCRA Q&A
[OCCRA]: hose clamps on drill transmissions' gear selector?

Thread Tools

Rate Thread

Display Modes

05-10-2004, 22:30

greencactus3 greencactus3 is offline

occra 23.

AKA: ryo

None #1481

Team Role: Alumni

Join Date: Feb 2004

Rookie Year: 2006

Location: North Farmington, MI

Posts: 1,523

[OCCRA]: hose clamps on drill transmissions' gear selector?

previous years' drill transmissions' gear selector tended to pop into "neutral" during matches so we clamped them in either gear with hose clamps... do you recommend doing so this year too? if yes, how? the gear selector is 90 degrees off from last year.. and also 3 gears...

Last edited by greencactus3 : 05-10-2004 at 22:31. Reason: clarify

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OCCRA]: drill transmission	greencactus3	OCCRA	4	14-10-2004 22:33
Coupling the drill motor with out the 15 tooth gear	Chopper_Dave	Motors	1	17-01-2004 01:06
Info on gear on drill motor	archiver	2000	2	23-06-2002 22:58
"Motors and Drive train edition" of Fresh From the Forum	Ken Leung	CD Forum Support	6	29-01-2002 12:32
drill motor transmissions	nwagers	Motors	16	29-01-2002 10:54

All times are GMT -5. The time now is 21:29.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.