Need help on informations (THE ARM OF THE ROBOT)

[Achan]

Originally Posted by greencactus3

uhh.. it matters on the robot you are talking about.
well the drive system( how the robot moves ex)wheels. treads.))are normally with motors. mostly the drills, chips, fp motors.
the arm(s).... well, there's endless ways of makeing an arm move. motor driven and pneumatic cylinders seem to be the most popular. of course, springs, gravity, and many other forces can be used too. and how they are controlled?
motors would normally be controlled to speed controllers aka victors.

ehh. i need to do hw. sumone take on from here

well, our robot arm had all its weight on a 1" aluminium bar, so if the bar would break, the arm would come completly off. That was our first time in robotics compitition, so we didnt exactly plan everything out that well..so i thought we could get some ideas of what a better version of an arm would look like..

[Arefin Bari]

Originally Posted by Achan

well, our robot had all its weight on a 1" aluminium bar and it supported EVERYTHING! that was our first time in robotics compitition, so we didnt exactly plan everything out that well..so i thought we could get some ideas of what a better version of an arm would look like..

how do you know that you would exactly need an arm as a mechanism for 2005 FIRST season... it always depends on the game... or atleast i think it does... there was another thread started by your own team member about the same topic... i have posted some basic information. please check those out... i hope that helps you out...

[Achan]

Originally Posted by Arefin Bari

how do you know that you would exactly need an arm as a mechanism for 2005 FIRST season... it always depends on the game... or atleast i think it does... there was another thread started by your own team member about the same topic... i have posted some basic information. please check those out... i hope that helps you out...

hey! thanks a lot! lols...i was looking through the forums and i saw it....

*note to self* look at forums before posting new thread..