Mounting Electrical Parts

[Jay H 237]

Originally Posted by Gamer2028

Also forgot to write this:
DO NOT USE LOCTITE ON SCREWS USED FOR VICTORS OR SPIKES. It will melt the plastic.

This also goes for some sensors and limit switches. If in doubt about putting loctite on the fastners for mounting your electronics use teflon tape instead. The teflon will "gum" the threads slightly to prevent them from vibrating lose, won't attack plastics, and still allows the fastners to be removed if needed. You don't need a lot, just one or two wraps around the screw or bolt.