What teams have desgined a 6 wheel drive system?

[Salik Syed]

6 wheels are awesome.... i would use them on ANY robot even 6" wheels and definitely 6 wheels are necessary for anything over 8" / pneumatic otherwise turning sucks.... the main thing is that the center wheel MUST be lower than the other two wheels otherwise its pretty pointless.... i guess you get more traction (and less turning) but with the center wheel our robot w/ 12" pneumatic tires, turned about 20 times better than our 2003 bot which had 4 wheels and 8" rubber tires

[Andrew]

Team 356 has used a six wheeled drive system (with suspension) in 2003 and in 2004. In 2003 we had chips and drills driving separate wheels (with the front wheels being chain driven from the center wheels powered by the drills). In 2004, all six wheels were independently driven (chips, drills, fps).

In 2003, the front suspension helped us keep all six wheels on the ramp and top of the platform when we were attempting to take the hill.

In 2004, the suspension helped us climb onto the two platforms. We generally had 4-6 wheels in contact with a surface at all times.

2003, the Velvet Fog (http://www.chiefdelphi.com/forums/sh...light=team+356)
(http://www.chiefdelphi.com/forums/sh...threadid=17799)

2004, Wolfgang (http://www.chiefdelphi.com/forums/sh...ad.php?t=25833)

[DougHogg]

Team 980 learned about the 6-wheel drive system (with middle wheels 3/16" lower) from Team 254 and Team 60. They in turn credited Team 25 with the idea.

This idea was a breakthrough for us. Previously we had to keep gearing down our robot so that we could turn without blowing fuses (especially turning in place). This last season, using 6 wheels, our robot could spin like a top. We used programming to implement a reduced turning speed (with a button to over ride the programming if we had to turn really fast). We used gyros during autonomous, but not when our drivers took over.

In conjunction with Team 716's two-motor gear boxes (non shifting design
using drill and black motors from the Chief Delphi White Papers), our robot
was fast and maneuverable this year.

As it turned out, we also had some luck that the six wheel design
contributed to. Originally we hadn't planned on going up onto the platform
to hang, but then it turned out to be really hard to grab the bar from the
floor. One of our students discovered that we could do a wheelie (by backing up and then quickly going forward) and climb onto the platform which made it possible for us to hang quickly.

We had wanted to direct drive the middle wheels from the gear box, but we
couldn't fit the gearboxes (with drill motors, transmissions and gear boxes) side by side, so we wound up driving all six wheels with chains. It turned out to be very reliable using 1/4" chain. Basically the drill/black motor combination drove all three wheels on each side, so we got full traction although only four wheels were on the ground at any one time.

Sorry I don't have any drive train pictures, but you can see our robot on
our web site at team980.com.

Thank you Teams 254, 60, 716 and 25 (and many other teams who have
helped us) for sharing your ideas. They were a big help!!!

[JVN]

Originally Posted by DougHogg

Team 980 learned about the 6-wheel drive system (with middle wheels 3/16" lower)

This last season, using 6 wheels, our robot could spin like a top.

Doug has gotten to the heart of the matter here.

The 6-wheel drive with the lowered middle wheel GREATLY increases the turning of the robot. I know MANY teams who implemented such a system.

My main question is...
What distance do you drop your middle wheel?

I spoke to Steve from 254 and he told me they use 3/16" (as Doug mentioned above). I spoke to others who said they use a full 1/2".

What does everyone else use?

Lately, in all my pre-season design efforts I've used 3/16. I don't really have any good reason for it; other than Steve said it works for them. (And I LOVE their robot in action...)

Anyone?

John

[Alex Cormier]

Originally Posted by JVN

Doug has gotten to the heart of the matter here.

The 6-wheel drive with the lowered middle wheel GREATLY increases the turning of the robot. I know MANY teams who implemented such a system.

My main question is...
What distance do you drop your middle wheel?

I spoke to Steve from 254 and he told me they use 3/16" (as Doug mentioned above). I spoke to others who said they use a full 1/2".

What does everyone else use?

Lately, in all my pre-season design efforts I've used 3/16. I don't really have any good reason for it; other than Steve said it works for them. (And I LOVE their robot in action...)

Anyone?

John

i've also heard 1/8"

[Wayne C.]

Originally Posted by JVN

Doug has gotten to the heart of the matter here.

The 6-wheel drive with the lowered middle wheel GREATLY increases the turning of the robot. I know MANY teams who implemented such a system.

My main question is...
What distance do you drop your middle wheel?

I spoke to Steve from 254 and he told me they use 3/16" (as Doug mentioned above). I spoke to others who said they use a full 1/2".

What does everyone else use?

Lately, in all my pre-season design efforts I've used 3/16. I don't really have any good reason for it; other than Steve said it works for them. (And I LOVE their robot in action...)

Anyone?

John

John-
Although it seems to make sense and would make design interesting we have never moved any of the center wheels from our machines out of line from the rest. We want the deep grab traction for the motors and pushing power. And I think any who play us will agree that the machines are speedy and maneuverable. We use two joystick tank drive on the machines and they can spin in place with no problem at all.

Perhaps the answer to this is the fact that we have such wide wheels (custom made from Skyway wheels) and a gearbox with great power. We are probably horsing the machine around so much when we turn that the coefficient of friction on the center wheel is negligible. We usually give the machines the "Big Mike" test- if they can shove him away they are strong enough. If we lowered the center wheel we negate the traction we are looking for back to 4 wheel drive.

WC

[RogerR]

Originally Posted by JVN

My main question is...
What distance do you drop your middle wheel?

we dropped our middle wheels just .1", and it worked fine for us.

[Wayne C.]

Originally Posted by Rich Kressly

I'm not sure if Team 25 has Inventor files, but they graciously shared their 2003 Evil Machine design with Team 103 who used it on their 2004 bot Monkey Business. Team 103 used only four wheels, but adding the additional two is no problem at all (In fact 103 had two more wheels on just two weeks before shipping). The Team 103 version of the Team 25 drive system is well documented in the 2004 Inventor Website found here:
http://inventor.cybersonics.org

Here are some pics of the drive system of the team 25 recent six wheeled modular monsters. The whole robot pic is the 2002 robot Silver Scorpion- that made it to the final 4 in Nats. The modular drive pic is from Evil Machine 1- the 2003 finalist. As we've learned we have made the drives modular so they can be detached as a unit and replaced quickly. The kids strip them down and reassemble them like a soldier does with a rifle. The drives have never failed- never. They are now obsolete and the next generation will be a little faster and a little more powerful, at least according to prototypes. We have some new ideas up our sleeves. ; )
WC

[artic_raven]

Originally Posted by Alex469

I know my team built a 6-wheel drive in 2002, but this was before my time and I don't know too much about it. The only pictures I could find on CD were here and here, but they probably won't help too much.
_Alex

is the bot still in tact or what?
if it is it would help me immensely if you could get a few pics of the motors and the way that it was all put together. if this is at all possible please help me out!!! thanks!

[gavinb900]

My team is thinking about 6 wheels. Has anyone experienced any problems with it? Does it go straight when its supposed to? Is turning smooth? Those are our main concerns right now. Thanks.
-gavin-

[Ali Ahmed]

6-wheel drive is probably the best way to go. It will drive straight if your chains and everything is tensioned properly. The only problem with driving straight is in the gearbox of the Drill motors. But thats only in the gearbox and is easily fixable. For turning the best to do that is to lower the middle set of wheels so that when you turning you are basically turning on those two set of wheels. We haven't had any sort of problem with our 6-wheel drive systems yet.

[RogerR]

Originally Posted by ali_rockon22

...The only problem with driving straight is in the gearbox of the Drill motors. But thats only in the gearbox and is easily fixable...

if you're talking about the directional bias that the drills have (i.e., they spin slower in reverse), its actually built into the drill motors themselves.