sphere bot

[JoeXIII'007]

I've always thought about it, never have proposed it to my team, but I've thought about it.

Thinking about it though, Stack Attack might have worked with this. If you could get some actual power.

There is no 'might have' with a sphere bot and Stack Attack. It would have been a champion bot just for the defensive capability and manuverability. I can see it knocking stacks of boxes down by 'bowling' into them and becoming king of the hill by rolling on top another bot or just evading them.

On a side note, why did I instantly think Samus when I saw this thread?



Source: Nintendo.com

[Adam Y.]

http://downloads.solarbotics.com/PDF/kit6.pdf http://www.chiefdelphi.com/forums/sh...ighlight=robot
Oddly enough this has been talked about before. It just was in the chitchat forum. Of course the robot discussed there pushed the definition of robot to the extreme.

[Adam Y.]

Please excuse me double posting but I figured it would be better than starting another thread on the same topic. Aparently there is a patent on a spherical robot. It was really quite random on how I discovered it because I was searching for the person's name. If anyone actually recognizes the name then you probably would know why I was curious.
Shperical robot patent

[greencactus3]

i just noticed. if you can have the spherical robot folded at the start and it folds out so the starting height limit is a little below the centerline of the sphere, then as much as other teams push you (assuming other teams robots only push from below the height limit), then they will not be able to push you (well they would, but) if you have a high traction, you can roll right over them no problem. anyone understand what im trying to say? please rephrase this then.

[phrontist]

Originally Posted by greencactus3

i just noticed. if you can have the spherical robot folded at the start and it folds out so the starting height limit is a little below the centerline of the sphere, then as much as other teams push you (assuming other teams robots only push from below the height limit), then they will not be able to push you (well they would, but) if you have a high traction, you can roll right over them no problem. anyone understand what im trying to say? please rephrase this then.

How would you change the size of the sphere? If it were somehow inflateable, it seems too easy to pop. I can't see any other expansion method being robust enough to work consistently.

[scitobor 617]

Originally Posted by phrontist

How would you change the size of the sphere? If it were somehow inflateable, it seems too easy to pop. I can't see any other expansion method being robust enough to work consistently.

Looking at lbridgwater's robot it may be possible to place a blower inside that central pole and have the pole open on one end and drill venting holes below where you place the blower, such that when the blower was run it would pull air into the pole and exhaust it out into the robot thru the venting holes. Now all you have to do is figure out how to wire that motor. Not to sure if that could easily be done but thats an idea.

[Levin571]

Another idea commonly passed around before was the idea of the hoverbot which would be cool to see but i haven't looked in the rule book for a while to see if it would be allowed

[phrontist]

Originally Posted by Levin571

Another idea commonly passed around before was the idea of the hoverbot which would be cool to see but i haven't looked in the rule book for a while to see if it would be allowed

It's perfectly legal, but even if you made it work you'd drain almost all of your resources (weight, power, fabrication time) doing it and in the end have a pretty useless bot.

Oh, btw, I fence foil, and I've challenged Max Lobovsky to a duel if we go to nationals...

Are you strictly saber?

[tkwetzel]

Originally Posted by greencactus3

i just noticed. if you can have the spherical robot folded at the start and it folds out so the starting height limit is a little below the centerline of the sphere, then as much as other teams push you (assuming other teams robots only push from below the height limit), then they will not be able to push you (well they would, but) if you have a high traction, you can roll right over them no problem. anyone understand what im trying to say? please rephrase this then.

If it is a sphere bot, then it is as wide as it is tall....and the width and length starting dimensions are much smaller, so it would have to be folded a lot or inflateable which probably wouldn't be to efficient because it would take a while to inflate anything strong enough to be on a FIRST field.

[greencactus3]

i was kinda thinking maybe a folding the shpere in eight peices. cutting it into 4 from each "side" of the box. then kinda swinging it in.. if there was a good strong light easy reliable way to do this with say,,, sheet metal, and cover the outside with some treads as to fit in the rules, maybe, but then again that just might not be strong enough. well a honeycomb structure sandwiched between two sheetmetal shperes. tediously welded together or sumthing.. mebe. but theres the lexan and heatgun idea again too. and for propolsion. probably try to have a thing inside the sphere that is independant of the shpere and rolls inside an easy omnishperical robot can be like

................______
............/....omnis...\
.........../.......[]........\
..........|........[].........|
...........\.......[]........./
.............\....omnis.../
................--------
comprehende?

my idea is, you need easy access inside the sphere obviously, so why not just have it expand out from an open to a closed more stable structure.