**FIRST EMAIL**/Autodesk Streamline Open Now!

[Goobergunch]

Hello. This is an important announcement for all FIRST Robotics Competition teams. Please share this information with the rest of your team in a timely manner. If you think that other members of your team would also like to receive these announcements, please encourage them to sign up at http://listserv.leapit.com/cgi-bin/l...join=frcpublic.

If you would like to stop receiving these messages, please see the bottom of this message for instructions.
__________________________________________________ ____

Greetings Teams:

Autodesk has created a site specifically for the FIRST Robotics teams on Autodesk Streamline, a hosted project management service.

On this site you will find the virtual Kit of Parts (rendered in Inventor and available after the kick-off), Autodesk updates, Autodesk awards criteria (available after the kick-off), Phil Dollan's presentation, etc. Autodesk Streamline is also the site where you will post your entries for the Autodesk awards.

Here are the system requirements for Streamline:

System Requirements

* Intel® Pentium® II-based PC with 450MHz or faster processor (266MHz minimum)
* Microsoft® Windows® 2000 (SP2 or later), Windows XP® Professional, or Windows NT® 4.0 (SP6 or later)
* Microsoft Internet Explorer 5.01 or later
* 256MB RAM (128MB minimum)
* 1024x768 display or higher
* 70MB free disk space
* Broadband (DSL, cable modem, or better) Internet connection (56 Kbps minimum)

To access this free site, please go to:

https://projectpoint.buzzsaw.com/client/first

User Name: (public)

Note: you must put the parentheses around the word public to log in.

Good luck teams!

Autodesk, Inc.