Random Tranformer and What do the CMUCam2 LED's do?

[CJO]

Mia Culpa,

You are right, L! is tracking

From the manual "LED 1 turns on when the camera confidently detects an object while tracking and provides feedback during a send frame. In automatic mode, LED 0 does nothing, so it can be manually set."

[Mike Betts]

Originally Posted by CJO

Mia Culpa,

You are right, L! is tracking

From the manual "LED 1 turns on when the camera confidently detects an object while tracking and provides feedback during a send frame. In automatic mode, LED 0 does nothing, so it can be manually set."

Don't apologize too quickly. I would expect contradictions in documentation with a product of this pedigree.

[swarm32]

OKay, so that was the problem with the software. Anyways, we did read the manual pdf, and couldn't locate what the one LED was really for. (maybe we are blind). We were also wondering why we were shipped the transformer. We thought it might be for powering the camera while configuring or something...

[CJO]

No idea on the transformer,

As fo the leds, use Acrobat to search for "LED." The result is on page 50 something.

[Mike Betts]

Originally Posted by swarm32

...We were also wondering why we were shipped the transformer. We thought it might be for powering the camera while configuring or something...

There was no transformer in the kit. You were, however, shipped two power supplies. One for recharging the NiCad battery and one for powering the operator interface.

[swarm32]

We were digging through a pile of junk this morning and figured out where the transformer came from. That's what we get for someone else organizing things...