|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Re: Project Box, Lexan Tube... Used for what?
Anyone know what the 6" long 3/4" PVC Sch 80 pipe (or a 3/4" sch 80 pipe nipple) and the 1' X 1' X 1/4" polycarbonate are for?
|
|
#2
|
||||
|
||||
|
Re: Project Box, Lexan Tube... Used for what?
Here was a post from JosephM in another thread. I liked these answers
http://www.chiefdelphi.com/forums/sh...&postcount=582 The magnet I believe was used to hang the tetras at the beginning The project box, as stated before was for the camera. i dont know if the tiny screws are to secure the cover on the project box and maybe the sheet of lexan to make a cover? (i havent looked at the project box) Eric Last edited by ebmonon36 : 11-01-2005 at 22:25. Reason: added my name :) |
|
#3
|
||||
|
||||
|
Re: Project Box, Lexan Tube... Used for what?
I'm still confused about whether to build the goals out of the PVC or Wood. It looks like they gave us both on the advanced BOM and are letting us choose. And the plywood? What's that for? Maybe the Tetra Auto loading station? Hmmm?
|
|
#4
|
||||
|
||||
|
Re: Project Box, Lexan Tube... Used for what?
Quote:
|
|
#5
|
|||||
|
|||||
|
Re: Project Box, Lexan Tube... Used for what?
Yes, use the PVC for the goals, and the plywood is for the automatic loading station.
|
|
#6
|
||||
|
||||
|
Re: Project Box, Lexan Tube... Used for what?
As stated earlier - the polycarb tube is for the KitBot wheel spacers. The Sch. 80 PVC is for transmission spacers to position the drive sprocket. I have submitted some photos of these two spacers to the Gallery - 2005 - Robots section (& I'll update this post with direct links when the photos are posted).
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| project box | archiver | 2000 | 2 | 23-06-2002 23:01 |