2005 FP Pinion

[Tristan Lall]

Originally Posted by Joe Johnson

This is bad... ...will you please post a picture of you motor -- especially the sticker on the side, a close up of the gear would be good too.

If you have 15T, then F-P has provided and/or FIRST shipped a mixed lot. Without actually taking the motor of the transmission it is close to impossible to tell the difference. Even off the transmission it can be very hard to make the ID.

This is worse: 188 has counted teeth, and the number is 13. I've just got off the phone with those involved, and they had separate people count it (twice!). For reference, the identifying marks on the motor are as follows:

74550-0642
TD034701

[Mike Betts]

Originally Posted by Tristan Lall

This is worse: 188 has counted teeth, and the number is 13. I've just got off the phone with those involved, and they had separate people count it (twice!). For reference, the identifying marks on the motor are as follows:

74550-0642
TD034701

All,

Team 177 has the number of teeth and markings as Team 188. 13 teeth (and I had two people check it).

Can Dr. Johnson or Mr. Copioli post a (hopefully small) spreadsheet or list of different motors and their relevant specs?

[Andy Brockway]

Originally Posted by Tristan Lall

This is worse: 188 has counted teeth, and the number is 13. I've just got off the phone with those involved, and they had separate people count it (twice!). For reference, the identifying marks on the motor are as follows:

74550-0642
TD034701

I checked our motors last night.

13 tooth
74550-0642
TD014602 - this is different, but what does that mean?

[Joe P]

Originally Posted by Andy Brockway

I checked our motors last night.

13 tooth
74550-0642
TD014602 - this is different, but what does that mean?

Just checked our FP motors.
13 tooth
74550-0642
TD034701
Made in China

Joe P
Team 647 Shoemaker Cyberwolves