|
|
|
 Consider that the 12V from your robot isn't any different from the 12V from your car's cigarette lighter. (Err... sorry... that's "power port" these days, thank goodness.) - dtengineering [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: How to cut flat sided holes for Globe and Door motor
circumscribed rectangles work just fine. the flat part of the shaft is what holds the assembly from spinning. if you have a cnc than you can mill the pocket to the correct shape. i've done it both ways with absolutely no trouble.
|
|
#2
12-01-2005, 22:20
|
|||||
|
|||||
|
Re: How to cut flat sided holes for Globe and Door motor
use a waterjet, a laser, a small endmill, a file, anything can do it
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
