|
Re: Using 6 motors in a drive system?
Quote:
|
Originally Posted by phrontist
Uh, depends on a lot of factors. Here is a tip: Battery capacity is measured in Amp-Hours. So if a battery is rated at 10 Amp-hours (that figure it entirely ficticious) this means you could draw 10 amps for an hour, or one amp for 10 hours (although this is not a perfect relationship, because batteries have internal resistances). You'll need to lookup the datasheets on everything you intend to put on the bot and make reasonable estimates for how much they will draw in the application you intend to use them in.
|
I would do this if I had an extra 8 hours and all the information put into 1 packet but maybe after build season I will. For rite now I think we will just do 4 motor drive system.
__________________
Team 1089 alumni coach.
|
There will always be a point in your FIRST experience when you realize you can get away with something that is against the rules. It is at that point when you have a choice to make about your own personal ethics, and what sort of example you will set for your students. - ToddF [more] 
12-01-2005, 23:49
Similar Threads
Threaded Mode