|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
We are finding out that the two window lift motors, both don't work with the interface that FIRST gave us, only one does. The Jideco motor does not mesh with the interface like the Denso motor. Has anyone figured out why this is or what to do to correct the problem?
Marjory "Frosty" ![]() |
|
#2
|
||||
|
||||
|
Re: Interface of the window lift motors
I noticed to. The checklist says its correct. I guess you will either have to match that gear, or make your own coupler. If you want a quick and dirty method, fill the larger coupler with epoxy and just place it on the smaller window motor. Should be about as strong as the plastic coupler is...
|
|
#3
|
|||
|
|||
|
Re: Interface of the window lift motors
Quote:
|
|
#4
|
||||
|
||||
|
Re: Interface of the window lift motors
Quote:
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Looking for practice motors & extra tape drive parts? | archiver | 2000 | 1 | 23-06-2002 22:54 |
| Complete Drill, Seat, and Window motors for trade | archiver | 2000 | 0 | 23-06-2002 22:16 |
| Complete Drill, Seat, and Window motors for trade | archiver | 2000 | 0 | 23-06-2002 22:16 |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 29-01-2002 12:32 |
| Drill Motors | TF8 | Motors | 19 | 12-12-2001 13:13 |