|
|
|
 As it stands your design defies physics (and breaks 1 of Karthik's 2 Golden Rules). - JesseK [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| As it stands your design defies physics (and breaks 1 of Karthik's 2 Golden Rules). - JesseK [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#26
16-01-2005, 00:38
|
|||
|
|||
|
Re: Hall Effect Sensor.
Is the Hall Effect Sensor included with the Kit an ATS660 or ATS665? The KOP lists it as a 665 but the specification sheet on the FIRST website is for the 660. The two models have different placements for the Hall IC element within the sensor. This means the 660 needs to be mounted so the end faces the teeth, while the 665 is mounted so the side faces the teeth. It would be helpful to know which model it is without having to test it by experimenting. Can anyone clear up this contradiction?
Distributors for the sensors can be found through the allegro website. A company called NU Horizons electronics sells the ats660, but the time to deliver looks like it is 16 weeks. Newark in one sells ats665 sensors at $4.30 each. Thanks Bobby Sakurai Team 159 Last edited by bobtheblob : 16-01-2005 at 00:49. Reason: Add information |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Making a Sensor Board | SpaceOsc | Technical Discussion | 11 | 15-05-2004 12:46 |
| heres the code. y this not working | omega | Programming | 16 | 31-03-2004 15:18 |
| Banner Sensor Programming Problem | 2Crisis | Programming | 4 | 24-02-2004 13:40 |
| IR sensor trouble | D.Viddy | Electrical | 2 | 30-01-2004 09:49 |
| Quick Optical Sensor Question | zorro | Technical Discussion | 10 | 21-01-2003 06:39 |
Threaded Mode