|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
[color=Blue]We are wanting to use window motors for our arm. We have been researching how to mount them but are having a little trouble, can someone please respond. We would like to know how to mount or use the window motors!!!!
|
|
#2
|
||||
|
||||
|
Re: questions on window motors!!!!! need help!
There are three convenient threaded holes in a circle around the shaft. You just need three of the right sized bolts and three holes in a plate of something to bolt the motor to.
|
|
#3
|
||||
|
||||
|
Re: questions on window motors!!!!! need help!
One of the window motors has a stud that sicks out from the center of the gear. This stud does not rotate with the gear. You can make a hole in a plate to stick this stud into that will hold the window motor a set distance from the gear you are trying to drive. Then you just need to use the mounting holes to keep the motor from rotating.
|
|
#4
|
||||
|
||||
|
Re: questions on window motors!!!!! need help!
There should be some holes in it so that you can bolt it into where ever you need to. if not the it could be possible to drill your own by taking the motor appart and goin though the shell making sure that you can get a bolt or 2 through.
Squeje250 |
|
#5
|
|||
|
|||
|
Re: questions on window motors!!!!! need help!
Thank you for your help, I know how to mount the motor. Do you know what size gears is on the motor and where I could get a mating gear? Any suggestions to how I can bolt a sprocket to the gear?
Last edited by nwbutterfly : 19-01-2005 at 18:05. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Looking for practice motors & extra tape drive parts? | archiver | 2000 | 1 | 23-06-2002 22:54 |
| Complete Drill, Seat, and Window motors for trade | archiver | 2000 | 0 | 23-06-2002 22:16 |
| Complete Drill, Seat, and Window motors for trade | archiver | 2000 | 0 | 23-06-2002 22:16 |
| "Motors and Drive train edition" of Fresh From the Forum | Ken Leung | CD Forum Support | 6 | 29-01-2002 12:32 |
| Drill Motors | TF8 | Motors | 19 | 12-12-2001 13:13 |