problem with void Process_Data_From_Local_IO

[CmptrGk]

ok, this has been sort of annoying, mplab says that there is a syntax error in this line void Process_Data_From_Local_IO(void) this to me makes no sense whatsoever. also, it says that there is a syntax error on the last line of the program which is completly blank. here is the problem code

 /*******************************************************************************
 * FUNCTION NAME: Process_Data_From_Local_IO
 * PURPOSE:	   Execute user's realtime code.
 * You should modify this routine by adding code which you wish to run fast.
 * It will be executed every program loop, and not wait for fresh data 
 * from the Operator Interface.
 * CALLED FROM:   main.c
 * ARGUMENTS:	 none
 * RETURNS:	   void
 *******************************************************************************/
 void Process_Data_From_Local_IO(void)
 {
 	  if (p3_sw_aux1 == 0 && p3_sw_top == 0 && p3_sw_trig == 0)
 	{
 		   auton_state = 1;
 	 }
 
 	 else if (p3_sw_aux1 == 1 && p3_sw_top == 0 && p3_sw_trig == 0)
 	{
 		auton_state = 2;
 	  }
 
 	else if (p3_sw_aux1 == 0 && p3_sw_top == 1 && p3_sw_trig == 0)
 	{
 		auton_state = 3;
 	}
 
 	  else if (p3_sw_aux1 == 0 && p3_sw_top == 0 && p3_sw_trig == 1)
 	{
 		auton_state = 4;
 	  }
 
 	  else if (p3_sw_aux1 == 1 && p3_sw_top == 1 && p3_sw_trig == 0)
 	{
 		auton_state = 5;
 	 }
   
 	else if (p3_sw_aux1 == 1 && p3_sw_top == 0 && p3_sw_trig == 1)
 	{
 		auton_state = 6;
 	}
 
 	 else if (p3_sw_aux1 == 0 && p3_sw_top == 1 && p3_sw_trig == 1)
 	{
 		auton_state = 7;
 	}
 
 	  else if (p3_sw_aux1 == 1 && p3_sw_top == 1 && p3_sw_trig == 1) 
 	{
 		auton_state = 8;
 	}
 	
 	
 }
 
 }
 
 
 /******************************************************************************/
 /******************************************************************************/
 /******************************************************************************/