Using non joystick controls with Operator Interface (Hacking Various Controllers)

AIBob · #1 31-01-2005, 22:33

Quote:

Originally Posted by Rickertsen2

The serial port on the OI is not analog. Perhaps you are confusing it with the gameports(joystick imputs) on the OI which are Analog. BTW the serial port on the OI is also unidirectional. It can only recieve information from the robot. It can't transmit anything to the robot.

The reason that I would automatically consider the 'Serial Port' as a Joystick by the way they said it, and knowing the serial ports unidirectional. That is why I had said that it is analog, I am sorry for the confusion.

Rickertsen2 · #2 31-01-2005, 22:46

Quote:

Originally Posted by AIBob

The reason that I would automatically consider the 'Serial Port' as a Joystick by the way they said it, and knowing the serial ports unidirectional. That is why I had said that it is analog, I am sorry for the confusion.

Its ait. Don't worry about it.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Changing 1 joystick code to 2 (rookie team)	Brawler006	Programming	5	20-02-2004 17:00
robot goes haywire with the one joystick default code	Miles	Programming	7	24-01-2003 14:58
Joystick controllers	archiver	2001	6	24-06-2002 00:57
joystick problem	archiver	2000	12	23-06-2002 23:08