|
Re: Wiring the Breaker Panel
Quote:
|
Originally Posted by Al Skierkiewicz
Steve,
A close look at the panel will show that breaker positions 1 and 2 are closest to the input terminal physically and electrically. My recommendation is that the RC be powered from either 1 or 2, minimizing the loss of high current loads on the voltage available to the RC.
|
Wouldn't wiring method go against their recommendation of wiring 30amp circuits first, then 20amp circuits?
__________________
2006 Championship Finalist, Thanks 25 + 968!
2006 Newton Division Winner
2006 International Innovation In Control Award
2006 Radio Shack Innovation in Control Award, UTC Regional
RIT Class of 2011
|