|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||||
|
|||||
|
24" Stroke 1.0625" Bore Piston Legality
According to the custom Bimba cylinders section on pg 7 of the pneumatics manual, 1.0625" bore pistons are not allowed. However, it is in the Bimba industrial catalog and update 8 seems to say that this would be allowed. Can someone clarify?
|
|
#2
|
|||||
|
|||||
|
Re: 24" Stroke 1.0625" Bore Piston Legality
Quote:
|
|
#3
|
|||
|
|||
|
Re: 24" Stroke 1.0625" Bore Piston Legality
Quote:
|
|
#4
|
|||||
|
|||||
|
Re: 24" Stroke 1.0625" Bore Piston Legality
You still have to use the bore sizes which are in the manual, however you can choose any of the strokes listed on the bimba website.
http://www.chiefdelphi.com/forums/sh...38&postcount=2 |
|
#5
|
|||||
|
|||||
|
Re: 24" Stroke 1.0625" Bore Piston Legality
Only the three bores called out seem to be allowed, just the stroke seemed to be in debate.
You must have caught the great discussions was over here: http://www.chiefdelphi.com/forums/sh...ad.php?t=33670 Last edited by Mark McLeod : 05-02-2005 at 09:42. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|