Code suddenly fails to initialize

[whakojacko]

if it was working before, what did you change?

[mandyo]

We didn't change anything. This is the first time we used this code. My programmer is at a loss. I got on chiefdelphi to try and solve the mystery. He doesn't know what the master code is. I have downloaded it now per the idea from another thread. What do you think? Should he have used the master code b4 trying to load his code? THx

[Matt Leese]

Yes, download the new master code before downloading any new programs. As far as I can tell, you need to download the new master code before you can download any code compiled with the new compiler. The master code can be found on IFI's website.

Matt

[mandyo]

We have done that now. We are still having problems... any other suggestions? We downloaded the new master code per the instructions. We downloaded our code into the robot. We are still stuck with the IFI error.

[mandyo]

When we download the program into the controller. (Now that we have downloaded the master code.) The program returns a green program state LED for about 2 seconds. Then the LED goes red. The RC LED is yellow. PLEASE help. Thanks to everyone who has helped so far.

Mandy

[Matt Leese]

Originally Posted by mandyo

When we download the program into the controller. (Now that we have downloaded the master code.) The program returns a green program state LED for about 2 seconds. Then the LED goes red. The RC LED is yellow. PLEASE help. Thanks to everyone who has helped so far.

Mandy

Try downloading the default code and seeing if you still get the red LED. If you don't, then it's a problem in your code that you need to fix the programming. If you do, then you're still having problems with the RC.

Matt