|
|
|
 If you see Navy ships in port, you're going to be fine. If you see ships pulling out, or no ships at all, go East. Fast. - Matt Howard [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| If you see Navy ships in port, you're going to be fine. If you see ships pulling out, or no ships at all, go East. Fast. - Matt Howard [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
20-02-2005, 23:59
|
|||||
|
|||||
|
Re: Shipping w/ Anderson Connectors
Found it:
ID: 1503 Section: 6.2 Status: Answered Date Answered: 2/7/2005 Q: Can the new batteries be shipped (in the original box with notches cut for the #6 wires) with the Anderson attached provided the battery terminals are properly insulated and an insulated cap is on the end of the connector? A: You may cut notches in your battery box as long as all the contents are secured within your box crate. There must be no unprotected leads and or visible connections. Your box must be sealed as securely as possible. Please follow the posted packing instructions in your Robot manual. I always forget about the Q&A. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| **FIRST EMAIL**/FedEx Airbills and Robot Shipping Information | Rich Wong | FIRST E-Mail Blast Archive | 0 | 05-02-2005 18:55 |
| How to take apart anderson connectors | M. Hicken | Electrical | 7 | 03-02-2005 08:53 |
| Restricted to the Anderson Connectors in the Kit? | sanddrag | Electrical | 15 | 20-01-2005 11:36 |
| PWM Style .100 pitch Male Connectors | BrianBSL | Electrical | 2 | 05-10-2004 19:43 |
| 45 or 75 amp anderson power products connectors to drill motors? | Andrew Wyatt | Motors | 2 | 20-12-2001 08:00 |
Threaded Mode