Go to Post By the end of the year, I have a feeling that I'm going to know much, much more about the intricacies of orbit balls than I ever wanted to. - Jared Russell [more]
Home
Go Back   Chief Delphi > Competition > Regional Competitions
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #16   Spotlight this post!  
Unread 20-03-2005, 23:17
roboticsguy1988's Avatar
roboticsguy1988 roboticsguy1988 is offline
Larry Johnston
AKA: Larry Boy
FRC #1501 (Team THRUST)
Team Role: Electrical
 
Join Date: Jan 2004
Rookie Year: 2001
Location: Huntington, IN
Posts: 290
roboticsguy1988 has much to be proud ofroboticsguy1988 has much to be proud ofroboticsguy1988 has much to be proud ofroboticsguy1988 has much to be proud ofroboticsguy1988 has much to be proud ofroboticsguy1988 has much to be proud ofroboticsguy1988 has much to be proud ofroboticsguy1988 has much to be proud ofroboticsguy1988 has much to be proud of
Send a message via ICQ to roboticsguy1988 Send a message via AIM to roboticsguy1988 Send a message via MSN to roboticsguy1988 Send a message via Yahoo to roboticsguy1988
Re: BOILERMAKER comments or suggestions

Quote:
Originally Posted by AmyPrib
Hay All,

Just a few comments. We know that seating was limited. Originally we were told we'd have less than what we did, but we pushed for more. We got it, but unfortunately not enough. That is one thing that will be worked on for next year.
On the other hand, to put a positive twist on it, don't you think it added to the huge energy and excitement that the place had? That place was slammin', people going nuts, yelling, screaming, and it got more intense as days went on, it's hard to get that kind of energy pumpin' with a HUGE arena with people spread out all over. While it may have been standing room only at times, people came together (closely!) and rocked the house!
We tried to get a larger venue (other campus facilities) but were not able for various reasons. It will be worked on next year, and if it has to be held in the Armory again, there can be some setup differences to allow more space or seating. We didn't have a ton of say in the setup, but definitely will look at it for next year. We planned for and expected high attendance but we got even more than that.

We did block off the first row for safety and to keep traffic moving. I personally think that no matter where the teams were sitting in the stands, they were pretty darn close to the action. I think it would have been tough to block off a section up front for playing teams with limited seating as it was. I think that would have caused overall less seating (those teams would already have another section they were sitting in, and then plus a reserved section taking up space they'd be moving back and forth to - spectators and others would have fewer places to sit). We actually had quite a few spectators from off the street that heard about it and attended with young children. I think that's awesome - spreading the word.

The only parking that had distance (1mile) was for the buses and trailers. We just could not accomodate them all in the lot behind the armory, but we did provide shuttle service for bus drivers. The parking garage across the street (1min walk) was reserved and free for everyone attending the event.

We also know the number one complaint was the bathroom facilities. We apologize for this, but we originally had better plans which fell through. This is high on the priority list for improving next year.

I was also shocked at the lack of time for alliance selections, but again that is out of our hands. Many issues are under FIRST control, but we can surely pass on the comments.

The campus tour times - already under discussion to work on better timing. Due to having the Union activities on Thursday evening (which all teams were informed about and confirmed to attend, and numerous announcements were made, but unfortunately few teams attended), we didn't have tours planned for that evening. We wanted to get to as many students as we were able and understand we were not able to accomodate drive teams better. We had good turn-outs for the tours despite that and think it worked out well... I am glad that we had these - I think it showed what Purdue is all about without pushing it on people.

We actually did have a few lines run for electricity in the bleachers, on the west side a couple rows up. But I don't think it was publicized as it was a late addition during the event. How 'bout the wireless internet? Did that work out ok for people?

We appreciate all the postive and negative feedback so far. We strive to make it enjoyable for everyone . The people that helped put this together are all experienced FIRSTers who care about making it a good, fun event. This is why we take your feedback seriously.
Keep them coming, and as Chris said, you can PM him or I with comments.

btw, Dangerousdave - can you give more details about the problems with queuing and pits? That was in your negative list, but not sure exactly the problems?

I am thoroughly impressed with the action packed competition and game-play that went on... I myself was a skeptical about the action involved in this game, but it was fierce this past weekend.

Thanks!
The wireless internet was awesome. I am glad to be able to access the internet at the Boilermaker regional. I know that it was disappointing to not be able to access the internet at other regional events. The only problem i found with that was the signal was weak, especially in the building, outside it was pretty good. may i suggest putting something to boost the signal or maybe even setup a wireless internet router connected to a T1 line if possible... if not even a normal connection to one of purdues servers would be fast enough. I know a lot of people used the internet and appreciated having it. Great job on that.

The only other technical problem i found was the electrical hookups in the pits. The wire supplying power to all the teams in the pits did not seem to be the appropriote guage for the amount of current that was being drawn. However i do have to say that it did stay consistant.

Other than that it looks like you know about the other problems and are working on fixing them for next year. This year was totally awesome and fun. For a rookie regional the planning commitee and everyone else did an excellent job. I give this regional an 8.65 out of 10.

Great job, hope to see everyone back once again next year.
__________________
Larry Johnston, Team THRUST, Team #1501, Team THRUST webpage

2005 IRI - Imagery and Design Award
2005 - 2006 BMR - Professional Grade Award
2006 BMR - Delphi Driving Tomorrow's Technology Award

"That can't be their 'bot. not nearly enough (if any) rivets to be a 1501 machine." ~ RogerR
~Da team that uses all tha rivets, Team #1501~


The FIRST Software Repository ~ Chief Admin
openFIRST ~ Project Supporter (Former editor)
DMOZ.org - FIRST - US Teams Section ~ Chief Editor
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
VCU Congrats, Thanks, Comments, & Suggestions Joe Matt Regional Competitions 10 13-03-2005 22:43
[OCCRA]: Scoring Comments Part 2 Nate Smith OCCRA 1 25-10-2004 12:54
IRI - Comments, Suggestions, Complaints, etc. Chris Fultz Off-Season Events 5 11-07-2004 20:42
Another idea looking for comments archiver 1999 16 23-06-2002 22:01


All times are GMT -5. The time now is 00:19.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi