Programmable LED Badges 1501 had at BoilerMaker Regional

[omutton]

Yay! I bought one!!!!

[KyleGilbert45]

These are pretty cool, and a good price too. I have one question though, does the serial end of the cable connect into the badge or the computer. The only reason i'm asking is because I have a laptop that doesnt have a serial connection and I don't want to spend the extra money on a Serial-USB converter.

[Kevyn H.]

Sorry, the serial end goes to the computer.

[george56]

cool!! I'm soo getting me one of those.

one question is the battery rechargable, do you know?

[Sscamatt]

They are standard CR2032 batteries, (they aren't rechargeable) You can buy them at radioshack for about $3 or order them for $1 each with your LED badge. I'm sure you can find a lot of them or something like that on eBay also.

[Chris_Elston]

Yeah eBay does have a few online now, you can get lots of 10 pretty cheap.

Chris

Originally Posted by Sscamatt

They are standard CR2032 batteries, (they aren't rechargeable) You can buy them at radioshack for about $3 or order them for $1 each with your LED badge. I'm sure you can find a lot of them or something like that on eBay also.

[dangerousdave]

chakorules, Thanks for the link. Received my 3 badges + batteries on Saturday and they work great!. Thanks also to Elston Systems, Inc. for offering the discount to First! Dave

[Chris_Elston]

FYI:

Elston System has decided to sponsor a special price for the LED badges once again for 2005/2006. They have TWO deals now.

Deal #1 Original Badge with upgraded FIRMWARE called Version 1.1. It can be programmed with software in kit or HyperTerminal. This means you can connect this badge to a serial device and send ASCII to the badge. We have not tried to connect this badge to the IRC controller, but it might be a possibility.

Link:
http://shopv2.elstonsystems.com/prod...products_id/49
The price did increase $2 this year to $14.00 from last years $12.00

Deal #2 is a whole new upgraded badge that can store up to 16 different messages. Includes (2) batteries now in the kit and an IR transmitter. Transmitter must be located within 2 cm of receiver unit on the back of the badge. It can not be programmed with HyperTerminal nor does it support ACSII strings.

Link:
http://shopv2.elstonsystems.com/prod...products_id/59
This new version 2.0 badge is special priced at $16.00 for FIRST robotics.

[Freddy Schurr]

i am thinking of ordering one

is it worth it?

[Greg Marra]

Originally Posted by chakorules

Deal #1 Original Badge with upgraded FIRMWARE called Version 1.1. It can be programmed with software in kit or HyperTerminal. This means you can connect this badge to a serial device and send ASCII to the badge. We have not tried to connect this badge to the IRC controller, but it might be a possibility.

Having worked quite a bit with serial communications on the RC for the CMUCam this year, I would say that anything you can do in HyperTerminal can be done on the RC. I can just picture capping a goal and having a little taunt scroll by the side of your robot...

[Kautz]

I only have two files on my disk.
Ledsend
ledbadge.csg

No LEDBadge.exe

Can run the program but can not load the program to the hard drive.

Do I need to get the LEDBadge.exe file from them or is there a way to load from the cd I have?

Thanks

[Chris_Elston]

Originally Posted by Kautz

I only have two files on my disk.
Ledsend
ledbadge.csg

No LEDBadge.exe

Can run the program but can not load the program to the hard drive.

Do I need to get the LEDBadge.exe file from them or is there a way to load from the cd I have?

Thanks

Ledsend is an EXE file. The way we do it, is copy that file anywhere on your hard drive. Then double click that file from your hard drive. You can't double click and run the LedSend.exe from the cd-rom because the EXE needs to save the config file. So just copy and paste that ledsend.exe to your hard drive, then double click that ledsend.exe and you should be all set.

By the way, for those of you that don't know. ledsend.exe is in reference to version 2.0. I think version 1.1 has a setupb.exe file with a "normal" installer. But version 2.0 does not have a "setup.exe" installer. You just gotta copy the exe file from cd-rom to hard drive.

[XtremeEagle04]

check these out:

www.icedoutgear.com/LED-buckles.php

some of my friends and I bought a few for when we go to the clubs in the area, the're real attention grabbers!

[Vince lau]

i finally found a place in the Toronto area that sells these, the one i got can store 6 different messages, the first one can do 512 characters, and remaining 5 upto 256 characters each

here is a pic of it

got it for $25 CDN + tax, with the optional battery back

[Taylor]

Above post reported.