Knobs/Switches for the OI

[billbo911]

Originally Posted by thoughtful

Hey,
I wired a 100K audio Potentiometer to OI. With the Middle and Outside terminals of the POT connected to the OI. I am getting the values from 231(min) - 254(max). Can any tell my what i am doing wrong or how i can increase this range. Thanks in advance.

Yo Thoughtful,
My guess is that you connected one end of the Pot. to +5vdc and the wiper to the sig. input, but didn't connect the remaining lead on the pot to gnd.
If that is the case, then your pot is just acting as a pull up resister, an adjustable one at that. That is why you are only seeing numbers in the very high end of the max range. Once you connect the other end of the pot to gnd, you will , in essence, be spreading the +5v across the entire length of the pot. Now as you move the slider/wiper along the length of the pot, you will see values from ~255 to ~ 0. Actual numbers will slightly different.

The other cause of what you are seeing is that you have an "open" in the wiring from gnd to the pot.