Quote:
|
Originally Posted by sparksandtabs
i am trying to write code to the device
but now when i am in the basic stamp editor it detects the com port but not the r/c it says something like unable to locate basic stamp
|
What version of the BASIC Stamp Editor are you using? I recommend getting the latest version (2.2) from Parallax.
Are you using a USB to serial adapter? They are not all the same. They don't all support all the signals needed by the editor for detecting and programming the BS2. If you have a computer available which has an old-school serial port, try using it.
When you apply power to the RC, what LEDs light up? There are various errors that will be indicated by the LEDs.
The Robot Controller Reference describes the LEDs and those error conditions.
Good luck.
