One Joystick Drive

[Alan Anderson]

Originally Posted by mattsavela

At the moment, it looks like [the motors] are both moving at the same speed when we turn

Sorry, I'm still not getting it. What makes you think the motors are at the same speed? Unless you're doing something you haven't mentioned, it wouldn't be turning if the motors aren't running at different speeds.

[mattsavela]

Im not positive about that. I'll let you guys know more on Thursday when I get a chance to test it in the pool with new code you guys helped with.

Also, the first code the Mark posted, when I put it in MPLab, it won't compile. I think I may be doing something wrong considering that I am new to programming, but when I take it out, it compiles fine. Any ideas?

[Mark McLeod]

Originally Posted by mattsavela

Also, the first code the Mark posted, when I put it in MPLab, it won't compile. I think I may be doing something wrong considering that I am new to programming, but when I take it out, it compiles fine. Any ideas?

Let's narrow the problem down.

What "baseline" code are you starting with? The IFI 2005 v2.2 default code (http://www.ifirobotics.com/docs/frc-...2-2005v2.2.zip) or something else, such as your team's 2005 modified code?

The code in my first post was quoted verbatim from the v2.2 default code and wouldn't have to be added. The default code already does what you want. The MPLAB problem you're encountering can be caused by lots of simple mistakes, especially if you've never used it before. It might be misplaced code, or if you aren't starting with the default code then the function Limit_Mix might be missing. Whenever you get an error you want to ask the forum about, post (copy and paste) the actual error message. That usually tells us all we need to know to solve the problem.

As an aside, you'll need to be sure the correct motor pwms are being used.

If you are starting with your team's customized 2005 code then post a zip of the user_routines.c file, so we can see what's been modified and how. Then we'll be able to describe the easiest may to add the one joystick lines if they aren't already there.

[mattsavela]

I attached my userroutines.c file

[Mark McLeod]

A couple of simple issues.

• The code for joystick control is in the Default_Routine() a few lines below the Process_Data_From_Master_uP routine(). The 1-Joystick code starts there on line 226 (in the version I attached). (In MPLAB look under Edit -> Properties and check "line numbers" if you don't already see them.)
• There was a ". . ." in my example above that isn't code and needs to be removed (sorry about that).
• Set both the MOTOR_CORRECTION's to zero to begin with. You'll only need to adjust those values if the operator cannot manually correct for the robot pulling to one side or the other. I don't know how hard it will be for your operator to see the robot underwater.
• Make sure your drive motor pwms are connected to pwm 13 (right motor) and pwm 15 (left motor).

I've attached a modified version, so you can see what I meant.
the new code is at lines 204-205 and 239-255.
What you wrote originally will actually work, but would be confusing to anyone reading the code, because it does all the joystick work in Default_Routine() then overrides it all in Process_Data_From_Master_uP().

Anyone else have comments to add?

[mattsavela]

We have cameras attached to our robot, so we can't actually see our robot, but we can see from certain perspectives.

Thank you guys so much for helping me with this.

[Mark McLeod]

We'd like to see photos and hear about your progress, so don't forget about us here on the ChiefDelphi forums.

Good Luck!

[mattsavela]

We have an online album of pictures. I'll check with our coach to make sure that I can give the link out.

[mattsavela]

http://photobucket.com/albums/v660/lhsrobotics/
http://photobucket.com/albums/y205/lhsrobotics1/


Those are the two links to our photo albums.

[N7UJJ]

I assume you are going to the MATE championship in Houston.
If so be sure to look for us. We also use the FRIST controller equipment on our ROV except we put the robot controller and the battery on the ROV. It allows us to use a small diameter tether which really helps the maneuverability.

Looking forward to meeting y'all

Allan

[mattsavela]

Yeah. We are going to the MATE competition in Houston. Our team saw some pictures of your team's robot (not sure what year), but it was in one of your past tech reports. It looked excellent.

[mattsavela]

We finally got a chance to test our robot in the pool. The robot worked fine going forwards, and turning. However, when we pull our joystick backwards, the robot goes forward, and when we push the joystick forward, our robot goes backwards. Is there a way you guys can help me fix that? Also, our robot does not goes very fast when it is moving backwards, but moves at a good speed when it goes forwards. Is there a way to make it so that when we go backwards, it goes the same speed as it goes when going forwards?

Thanks