|
|
|
 The entire season, when someone yelled "Robot" I would yell back "Human" and stand my ground. - DonRotolo [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| The entire season, when someone yelled "Robot" I would yell back "Human" and stand my ground. - DonRotolo [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
PBASIC operator interface LED problems
on the operator interface there are the LEDs for the pwm's and the relay's, they al work but just not how they are supposed to, i loaded up the basic code and from what i understand for pwm 1 when the joystick is all they way forward the green LED should be on and when the joystick is all the way back the red LED should be on, and when the joystick is centered both should be on, and the same with the pwm2 and its corrosponding joystcik, but this doesn't happen the LEDs all just randomly blink
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Making a beacon indicator LED burn its brightest without burning out | DanL | Electrical | 7 | 26-01-2004 08:05 |
| Help On Coding 2K1 Controller | GregTheGreat | Programming | 9 | 05-12-2003 18:35 |
| Any problems with PBASIC 2.5 Editor v2.0 | Carl Owenby | Programming | 7 | 10-02-2003 10:00 |
| Rookie Programmer has question about the default code | DanL | Programming | 3 | 26-01-2002 19:59 |
Threaded Mode