|
Re: Offseason Development - Let's see it!
Quote:
|
Originally Posted by sanddrag
If the shafts are pressed into the plates (and straight) that should work fine. Your output speeds are quite high. Our HexaMAx was so large and heavy because we did all the reduction with gears in the box, and drove a 5.5" wheel straight off that. Our output speeds were theoretically about 600 rpm in high and 225 rpm in low.
|
we have a pretty big sprocket reduction, haha.
__________________
WHS/CHS Robotics - Team 100 (2003-2006):
2006- Delphi's Driving Tommorow's Technology @ Davis | Imagery Award @ SVR | 2004- SVR Finalists (w/ 691 and 1280)| 2003- Delphi's Driving Tommorow's Technology @ Sac
|
"Everything is possible. Just depends on how much it costs and how much physics you have to apply..." - Kimmeh [more] 
08-07-2005, 05:54
Similar Threads
Threaded Mode