|
|
|
 Both might accomplish the same "function" or "results" (perhaps a lift of some kind), but there are clear differences in simplicity, in cost, in maintainability, extensibility, and several other "ilities" -- which are a staple of engineering evaluation criteria. - msd [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Compiling Help!!
We're using the Microchip MPLAB version 7.00 and the C18 v2.4 compiler. We can load the pre-compiled code (FRC_default.hex) to the robot with no errors and it works just fine. Our problem is when we try to compile the code (that FRC_default is supposed to be compiled from) with no changes whatsoever to the code and load it to the robot, we get a program error (as in the program state LED on the robot controller is flashing green and red). We expierenced this problem last year as well, but i can't for the life of me remember what we did to fix it. It obviously seems to be a compiling issue because the pre-compiled default works fine. I have tried useing different computers to compile but nothing is working still. Any help from anybody would be great, thanks.
-Andrew Team #612 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Moody Compiling on certain computers... | ConKbot of Doom | Programming | 4 | 28-02-2005 18:22 |
| Compiling Failed | Teh Mike | Programming | 7 | 09-02-2005 13:27 |
| Compiling Problems | Chris Hleva | Programming | 11 | 20-02-2004 17:12 |
| White Paper Discuss: IFI Loader for Linux with compiling instructions | CD47-Bot | Extra Discussion | 1 | 09-02-2004 16:46 |
| Problem compiling edubot | Ben B | Programming | 3 | 14-01-2004 00:51 |
Threaded Mode