|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#15
|
|||
|
|||
|
Re: EEPROM Code
Kevin,
I haven't tried this, but from the PIC documentation, it looks like you only have to disable the interrupts during the period that you call "pre-write sequence" and "execute the write" in the EEPROM_Write_Handler routine. You should be able to re-enable the interrupts after these 3 lines (from the 39609b Microchip document, section 7.4) rather than waiting until the 2ms write is complete. This may also eliminate the code error by allowing the high priority interrupts to mostly go on schedule. Mike |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Out of the Box Camera Code | russell | Programming | 9 | 21-10-2009 05:28 |
| Code suddenly fails to initialize | miketwalker | Programming | 11 | 19-02-2005 15:23 |
| Team THRUST - Kevin's Code and Camera Code Combine | Chris_Elston | Programming | 3 | 31-01-2005 22:28 |
| Sourceforge for Code Repository and other stuff | SilverStar | Programming | 9 | 15-01-2005 21:16 |
| heres the code. y this not working | omega | Programming | 16 | 31-03-2004 15:18 |